简介

主要从事复合材料力学、3D打印复合材料及4D打印智能复合材料等领域研究。

曾获得“中国复合材料学会优秀博士学位论文”；入选“中国科协青年人才托举工程”；“重庆市A类人才”；“重庆市博士后创新人才支持计划”等奖励。主持国家自然科学基金面上及青年项目，重庆市自然科学基金面上项目等。作为骨干人员，参与国家联合基金重点项目、国家自然科学基金重点项目等。

近年来发表Additive Manufacturing、International Journal of Solids and Structures、Composites Science and Technology、Composites Part B、Journal of Aircraft等增材制造、航空航天、复合材料及固体力学顶级期刊发表论文近40篇。

担任多个国际SCI期刊及国内期刊编委、青年编委等。任中国复合材料学会、中国发明协会多个分会委员及专家。

 教育背景

博士 清华大学 

本科 武汉大学

  研究领域

• 3D/4D打印装备研发

• 3D/4D打印材料研发

• 复合材料工艺分析

• 复合材料力学分析

• 复合材料结构设计

• 复合材料软体机器人设计

 科研项目

主持 国家自然科学基金委 面上项目

主持 国家自然科学基金委 青年项目

主持 中国科协 青年托举人才项目

主持 重庆市 博士后创新人才支持计划

主持 重庆市自然科学基金 面上项目

  论文发表

发表Additive Manufacturing、International Journal of Solids and Structures、Composites Science and Technology、Composites Part B、Journal of Aircraft等增材制造、航空航天、复合材料及固体力学顶级期刊发表论文近40篇。申请发明专利5项。10篇代表性论文如下：

• Fu Y, et al. Analysis of thermo-kinetic behavior and thermoforming stresses of woven  fabric/thermoplastic polyether-ether-ketone composites. Composite Structures 370 (2025) 119416.

• Fu Y, et al. Multiscale coupling analysis of energy absorption in 3D printed continuous  fiber reinforced thermoplastic orthogonal fabric composites. Additive Manufacturing 84 (2024) 104084.

• Fu Y, et al. Systematical mechanical analyses of 3D printed short carbon fiber  reinforced polyetheretherketone composites. Composites: Part A 185 (2024) 10832.

• Fu Y., et al. Full-process multi-scale morphological and mechanical analyses of 3D printed short carbon fiber reinforced polyetheretherketone composites. Composites Science and Technology (2023), 236: 109999.

• Fu Y, et al. Micro-structure and tensile property analyses of 3D printed short carbon fiber reinforced PEEK composites. Composites Communications (2023), 41: 101655.

• Fu Y, et al. Compressive damage and heat release of composite laminate with circular prefabricated defect, part I-experimental method. Composite Structures (2022), 279: 114860.

• Fu Y., et al. Mechanical analysis of adhesion between wearable electronics and human skin based on crack theory of bi-material interface. International Journal of Solids and Structures (2022), 254-255: 111850.

• Fu Y., et al. Novel designable strategy and multi-scale analysis of 3D printed thermoplastic fabric composites. Composites Science and Technology (2022), 222: 109388.

• Fu Y., et al. Multi-scale analysis for 3D printed continuous fiber reinforced thermoplastic composites. Composites Science and Technology (2021), 216: 109065.

• Fu Y., et al. Rational design and characterization of lattice structures made from circular-arc curved bars. International Journal of Solids and Structures (2021), 208-209: 235-246.

5篇指导学生代表性论文如下：

• Li J, Wang C, Fu Y*, Xia D, Xu P, Xiang C, Wu J, Li J, Li Y*, Li F, Shi H, Sun B, Fu S*. Mechanical characterization of 3D printed multiscale carbon nanofiller/continuous fiber reinforced polymer hybrid composites. Polymer Composites. 2025; 1–19.

• Wu J, Fu Y*, Gong L, Li J, Xia D, Li J, Guo F, Li Y*, Fu S*. Process-induced residual stresses of CFRP laminates with integrated  rubber layer. Composite Structures 371 (2025) 119461.

• Li J, Fu Y*, Pi W, Li Y*, Fu S*. Improving mechanical performances at room and elevated temperatures of 3D printed polyether-ether-ketone composites by combining optimal short carbon fiber content and annealing treatment. Composites Part B 267 (2023) 111067. 

• Mao Y, Dong G, Fu Y*, Li Y*, Huang P, Fu S*.High performance shape-adjustable structural lithium-ion battery based on  hybrid fiber reinforced epoxy composite. Composite Structures 325 (2023) 117598.

• 李家雨，付宇彤*，李元庆，付绍云. 增材制造仿生结构的力学性能优化及其功能设计研究进展. 复合材料学报 2024，04，24.

  指导学生